| 耐磨地坪施工工艺流程 |
| 添加时间：2019/9/5 11:42:10 浏览次数： |
| 耐磨地坪在近年来非常的火热，其耐磨性好，硬度高、寿命比普通地坪寿命更长，可以运用于各种场合，受到人们的欢迎。今天，我们一起来看下耐磨地坪的工艺流程。 Wear-resistant floor is very hot in recent years. It has good wear resistance, high hardness and longer life than ordinary floor. It can be used in various occasions and is welcomed by people. Today, let's look at the process of wear-resistant floor. 首先，我们要将基层清理干净，并去除泌水，然后泼洒固化剂材料，其次，将材料浸泡充分时间后，用水清洗地面，并清除地面多余的水和残料，进行打磨施工，当打磨到一定程度并出现亮光后，耐磨地坪施工完成，最后清理现场，也可以根据客户的需求，进行抛光处理，提高耐磨地坪的亮度。 First of all, we should clean the grass-roots and remove the bleeding, then sprinkle the solidifying agent material. Secondly, after soaking the material for a full time, we should clean the ground with water, and remove the excess water and residue of the ground, and carry out polishing construction. When the polishing reaches a certain degree and the light appears, the construction of the wear-resistant floor is completed, and finally the cleaning is completed. On-site polishing can also be carried out according to the needs of customers to improve the brightness of wear-resistant floor. 耐磨地坪施工工艺流程： Wear-resistant floor construction process: 浇筑混凝土→磨压固化剂→封堵毛细孔结晶→磨压固化剂→混凝土聚硅改性→抛光晶面剂→耐磨地坪(混凝土密封固化地坪) Pouring concrete Grinding curing agent Closure of capillary crystallization Grinding curing agent Modification of concrete polysilicon Polishing crystal surface agent Wear-resistant floor (sealed and solidified concrete floor) |
| 上一页 环氧防静电地坪施工基面要求 |
| 下一页 防腐地坪漆为三组份漆 |